MIL-M-45424D (MU)
AQL 0.65 percent
Major:
Start of perfect thread,
101.
06001
plug end . . . . . . . . . . . . Gage
Start of perfect thread,
102.
06002
slit end . . . . . . . . . . . . Gage
06003
103.
Slot width, minimum (min.) . . . . Gage
Minor:
AQL 0.65 percent
201.
Evidence of poor workmanship
06004
(see 3.4) . . . . . . . . . . . . . . . Visual
4.3.2.7 Carton sealed (see section 5).
Categories
Method of
Code No.
Defects
Inspection
None defined
Critical:
AQL 0.65 percent
Major:
Contents move when carton is
101.
shaken (insufficient filler
material) . . . . . . . . . . . Manual
07001
Carton damaged so that contents
102.
are exposed or liable to
07002
become exposed . . . . . . . .Visual
Sealing strip incomplete,
103.
badly wrinkled, or not fully
attached to surface around
entire carton . . . . . . . . . . . Visual
07003
Minor:
0.65 percent
AQL
201.
Marking misleading or
07004
unidentifiable . . . . . . Visual
4.3.3 Testing
4.3.3.1 Hardness and carburization of ball (see dwg.
8800922) - Major defects - Code No. 04004 for hardness and
Code No. 04005 for carburizatiorL.-Fifteen (15) balls from each
heat treatment batch shall be selected for these tests. If a
total of two or more balls fall to comply with either
requirement or both requirements combined, the heat treatment
batch shall be rejected. The tests shall be performed as
specified in 4.4.1 and 4.4.2 using equipment i.n accordance
with 4.3.4.
9