MIL-M-45424D (MU)
4.3.3.2 Susceptibility to cracking
4.3.3.2.1 Case assembly (see 3.3.1) - Major defect -
Code No. 03012.-A sample of thirty-five case assemblies
shall be selected from each lot for this test. If one or
more case assemblies fail to comply with the requirements
specifed, the lot shall be rejected. The test shall be
performed as specified in 4.4.3.1, using equipment in
accordance with 4.3.4.
4.3.3.2.2 Covers (see 3.3.2) - Major defect - Code
No. 02003. -A sample of thirty-five covers shall be selected
from each lot for this test. If one or more covers fail to
comply with the requirements specified, the lot shall be
rejected. The test shall be performed as specified in
4.4.3.2, using equipment in accordance with 4.3.4.
4.3.3.2.3 LOW temperature (see 3.3.3) - Major defect -
Code No. 03013 for case assemblies and Code No. 02016 for
covers. -A sample of fifteen case assemblies and fifteen
covers shall be selected from each lot for this test. If
one or more case assemblies or covers fail to comply with
the requirement specified the corresponding lot shall be
rejected. The test shall be performed as specified in
4.4.3.3 using equipment in accordance with 4.3.4.
4.3.4 Inspection Equipment.-Equipment Tabulation
Number ET-8885262 identifies the inspection equipment
required to perform the examinations and tests prescribed
in this section. The contractor shall design inspection
equipment in accordance with the instructions in paragraph
6.3.
4.3.4.1 Government rights to documentation.-Inspection
equipment drawings and lists provided and revised in
accordance with the requirements of the ET may be used by
DOD activities for design, procurement, manufacture, testing,
evaluation, production and receiving inspection, overhaul,
shipping, storage, identification of stock, ordering and
storage of replacement parts, inspectionof items at overhaul
general maintenance of equipment, construction, survey and
whenever inspection equipment drawings are needed.
10