MIL-I-50412 (MU)
DRAWINGS
ORDNANCE
Initiator, Sub-Assembly
9204185
PUBLICATIONS
ORDNANCE CORPS
ET-9204185
Equipment Tabulation
(Copies of specifications, standards, drawings, and publications
required by suppliers in connection with specific procurement
functions should be obtained from the procuring activity or as
directed by the contracting officer. )
2.2 Other publications .-The following documents form a
part of this specification to the extent specified herein. Unless
otherwise indicated, the issue In effect on date of invitation
for bids shall apply.
AMERICAN SOCIETY FOR TESTING MATERIALS
Specific Gravity and Density of
ASTM-D-792
Plastics by Displacement
ASTM-D-1621
Compressive Strength of Rigid
Cellular Plastics
(Copies may be purchased directly from the American Society for
Testing Materials, 1916 Race Street, Philadelphia, Pennsylvania,
19103) .
REQUIREMENTS
3.
3.1 Material. -The materials and parts for the Initiator
sub-assembly shall be In accordance with the applicable drawings
and specifications listed in 2.1. The materials for the outer
cup and the inner sleeve shall have a tolerance of ± 1 ercent
for tin, + 0.75 percent for the since, and ± 0.5 percent for
cadmium.
3.2 Stability. -The propellant for the front support shall
not completely change the color of the methyl violet paper to
salmon pink color in less than sixty (60) minutes when tested In
accordance with 4.3.3.1.
3.3 Bulk Density .-The bulk density of the front support
shall be 1.30 grams per cubic centimeter maximum when tested
as specified In 4.3.3.2.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business