MIL-D-63370(AR)
3.7.26 Dispenser Fitted Cover. The dispenser cover (P/N 9291399) shall
be placed over the entire dispenser and secured at the comers and along the
front, back and sides. The cover shall be pulled tightly over the dispenser
but care must be taken not to tear or puncture the cover.
3.4 Marking. In addition to the special marking requirements specified
in this paragraph, dispenser contract or purchase order, the dispenser shall
be marked in accordance with the applicable requirements of MIL-STD-129.
3.4.1 Preservation Data Marking. Preservation data marking shall be
stenciled or printed on pressure sensitive labels for CONUS and oversea
shipments. Labels shall be 2 -1/2 inches high and twenty (20) inches wide.
The following basic marking is required: (see following example)
a. Packaging document number and revision number, level
and date of protection.
b. Gross weight, 12,500 lbs; cube, 1122 cu ft; outside
W96
dimensions, L198
H102
c. Contractor's name or depot symbol.
d. When dispensers are processed in accordance with manufacturer's
standard practice or deviation is made from the processing document, the
statement "not processed for storage" shall appear in lieu of the level of
processing.
e. Preservation data marking shall be 1/2 inch high and shall be
spaced as indicated on following illustration.
f. Labels for Level A shipments, other than entirely printed, shall
be waterproofed by coating the entire outer surface of the label with coating
compound conforming to Specification MIL-C-17504, or waterproofing compound
certified as equal to the above and compatible with the label material.
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business