MIL-C-64030(AR)
FROM
TO
J1-12
J1-24
J1-13
J1-25
J1-23
A1A2E10
J1-23
A1A2E25
J1-23
A1A2E26
Casting*
A1A2E20
4.5.2.3.2 Test Connections. Unless otherwise specified
herein, all test connections, adjustments and manipulations
specified for a test shall be retained throughout subsequent tests.
4.5.2.3.2.1 Loads.
Connect loads as indicated below:
LOAD
FROM
To
1.5
ohm 2%
1W
DET1 (J1-12)
DET1
(R)
(J1-14)
1.5
ohm 2%
1W
DET2 (J1-13)
DET1
(R)
(J1-15)
See
figure
6
TUBE1 (J1-16)
TUBE1
(R)
(J1-3)
See
figure
6
TUBE2 (J1-17)
TUBE2
(R)
(J1-4)
TUBE3 (J1-18)
See
figure
6
TUBE3
(R)
(J1-5)
See
figure
6
TUBE4 (J1-19)
TUBE4
(R)
(J1-6)
See
figure
6
TUBE5 (J1-20)
TUBE5
(R)
(J1-7)
See
figure
6
TUBE6 (J1-21)
(J1-8)
TUBE6
(R)
TUBE7 (J1-22)
See
figure
6
TUBE7
(R)
(J1-9)
4.5.2.3.2.2 Power source. Rotate the SAFE/ARM Switch
clockwise to the SAFE position. Set the output of a O to 15 volt
1 amp DC power supply to 13 ± 0.5 volts. Connect the negative
terminal to P1-BLK (COMMON) and then the positive terminal to
Pi-RED (+14.4 VDC).
4.5.2.3.3 Lamp test. Press each of the three indicator
lights on the Control Indicator front panel: BATT OK, CKT OK and
DATA IN. Verify that each light is illuminated when depressed and
not illuminated when released.
4.5.2.3.4 Self test. Rotate the SAFE/ARM switch clockwise to
the TEST position. Verify that the BATT OK and CKT OK lights are
on within 4 seconds.
4.5.2.3.5 Low voltage detect (LVD) test. Reduce the voltage
at Pi-RED (+14.4 VDC) to 11.05 ± 0.05 volts. Verify that the BATT
OK light is on. Reduce the voltage at Pi-RED (+14.4 VDC) to 10.35
± 0.05 volts. Verify that the BATT OK light is off. Increase the
voltage at Pi-RED (+14.4 VDC) to 13 ± 0.5 volts.
4.5.2.3.6 Load test. Rotate the SAFE/ARM Switch clockwise to
the load position. Load a valid field set data (FSD) pattern, as
defined on Drawing 9333026, into the Control Indicator by
applying the pattern to J1-1 (MCD1) with respect to J1-14 (MCD2)
as shown in figure 8. Verify that the DATA IN light turns on.
92
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business