INCH-POUND
MIL-DTL-50512A
1 February 2010
SUPERSEDING
MIL-M-50512 (MU)
29 February 1972
DETAIL SPECIFICATION
MINE, APERS, PRACTICE, M68
ASSEMBLING AND PACKING
Inactive for new design after 19 August 1997
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
1. SCOPE
1.1 Scope. This specification prescribes the requirements and identifies the verification
procedures for the Mine, APERS, Practice, M68.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 or 4 of this
specification. This section does not include documents cited in other sections of this
specification or recommended for additional information or as examples. While every effort has
been made to ensure the completeness of this list, document users are cautioned that they must
meet all specified requirements of documents cited in sections 3, or 4 of this specification,
whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract.
Comments, suggestions, or questions on this document should be addressed to:
Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey
07806-5000 or e-mailed to ardecstdzn@conus.army.mil. Since contact information can
change, you may want to verify the currency of this information using ASSIST Online
database at https://assist.daps.dla.mil.
AMSC N/A
FSC 1345
DISRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business