MIL-DTL-45417D
4. VERIFICATION
TABLE I. Requirement/verification cross reference matrix.
Methods of verification
Classes of verification
1 Analysis
A First Article
2 Demonstration
B Conformance
3 Examination
4 Test
Section 3
Description
Verification
Verification Class
Section 4
Requirements
Method
Verification
Method
1
2
34
A
B
First article
XX
X
4.2, Table II
Conformance
XX
X
M7 bandoleer
XX
X
X
Table II,
Table III
Workmanship
X
X
X
4.1. Classification of verification. The verification requirements specified herein are
classified as follows:
a. First article (see paragraph 4.2)
b. Conformance (see paragraph 4.3)
4.2. First article. When specified, a sample shall be subjected to first article verification
in accordance with Table II.
TABLE II. First article tests and inspection.
Paragraph
Reference /
Drawing
Sample
Requirement
Classification
Examination or Test
Number
Size
Paragraph
Inspection
Method
M7 Bandoleer.
8836015
1/
Examination for defects
15 2/
1/
1/
Workmanship
2/
4.4, 1/
Notes:
1/ See 13048815 for explanation of "reference to characteristics" symbol including classification of
characteristics, sampling/acceptance requirements, and inspection methods.
2/ Unless specified otherwise, the sample size for each sub-level drawing shall be in accordance with
the sample size of the top level assembly listed.
4.2.1. First article rejection. If any assembly, component or test specimen fails to
comply, the sample shall be rejected.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business