MIL-DTL-45417D
3. REQUIREMENTS
3.1. Required inspections.
3.1.1. First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.1.2. Conformance. A sample shall be subject to conformance inspection in accordance
with 4.3.
3.2. Materials, components and assemblies.
3.2.1. M7 bandoleer. The M7 bandoleer shall comply with all the requirements specified
on drawing 8836015, its components, and its assemblies.
3.3. Workmanship. All parts and assemblies shall be free of tears, rips, burrs, sharp
edges, chips, cracks, splits, dirt, rust, corrosion products and other foreign material. All parts
shall be assembled without the presence of burn marks, tears, rips, scratches, dirt, grease, rust,
corrosion products and other defects and foreign matter. Stitching shall be evenly spaced in
regular lines and tight with thread endings securely fastened. Thread breaks and seam end
without cross-stitching shall be back stitched for not less than one inch. Cloth shall not be
frayed, ripped, cut, unwound, or discolored. The cleaning method used shall not be injurious to
any part nor shall the parts be contaminated by the cleaning agent. All required markings shall
be neat and sharply defined.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business