MIL-T-48134A (MU)
3.5
Ambient
Functioning
3.5.1 The indicator lamp shall flash when an external load
(resistance) of 200 ohms is connected across the terminals of the
test set.
3.5.2 The lamp shall not flash when the external load across
the terminals is 300 ohms.
3.6 Energy Output Test. - A single actuation of the handle
shall produce an electrical output of 1.4 milliwatt-seconds maxi-
mum (max.) through a resistance of 2.5 ohms.
3.7 Drop Test. - Test sets shall show no evidence of crack-
ing or separating, and shall function in accordance with 3.5 after
dropping from a height of 5.0 feet at ambient temperature.
3.8 Workmanship. - All parts and assemblies shall be fabri-
cated and finished in a thorough, workmanlike manner.
They shall
be free of burrs, chips, sharp edges, cracks, crazes, unblended
radii, porosity, warpage, burn marks, checks, chipped edges, blis-
ters, excess flash, dirt, grease, rust, salt deposits, visible
raised cement seams, solder splash, corrosion products and other
defects and foreign matter which would affect their serviceability.
The cleaning method used shall not be injurious to any part, nor
All re-
shall the parts be contaminated by the cleaning agent,
quired markings shall be neat, legible and sharply defined.
3.9 First Article Inspection. - This specification makes pro-
visions for first article inspection.
Requirements for submission
of first article samples by the contractor shall be as specified in
the contract.
4.
QUALITY
ASSURANCE
PROVISIONS
4.1 Responsibility for Inspection. - Unless otherwise speci-
fied in the contract or purchase order, the supplier is responsible
for the performance of all inspection requirements as specified
herein.
Except as otherwise specified in the contract or order,
the supplier may use his own or any other facilities suitable for
the performance of the inspection requirements specified herein,
The Government reserves the
unless disapproved by the Government.
right to perform any of the inspections set forth in the specifi-
cation where such inspections are deemed necessary to assure sup-
Reference
plies and services conform to prescribed requirements.
The
shall be made to MIL-STD-109 to define terms used herein.
provisions of MI L-A-2550 shall apply.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business