MIL-H-64033A(AR)
3.4.2 Surveillance. The contractor shall provide for
surveillance quantities of Housing, Molded Dwg. 9337419 from each
months production. A total quantity of 2 housings per month shall
be supplied in accordance with 4.5.2.
3.5 First article inspection. This specification contains
technical provisions for first article inspection. Requirements
for the submission of first article samples by the contractor
shall be as specified in the contract.
3.6 Workmanship. All parts and assemblies shall be
fabricated and finished in a thorough workmanship manner, and all
manufacturing processing, and assembly operations shall be
correctly performed. Metal parts shall be free of burrs, chips,
cracks, crazes, porosity, warpage, burn marks, checks, chipped
edges, blisters, excess flash, dirt, grease, rust, salt deposits,
corrosion products, and other defects or foreign matter which
would affect their serviceability. The cleaning method used shall
not be injurious to any part or assembly, nor shall the parts be
contaminated by the cleaning agent. All required markings shall .
be neat, legible and sharply defined.
4 QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise
specified in the contract or purchase order, the contractor is
responsible for the performance of all inspection requirements as
specified herein. Except as otherwise specified in the contract
or purchase order, the contractor may use his own or any other
facilities suitable for the performance of the inspection
requirements specified herein, unless disapproved by the
Government. The Government reserves the right to perform any of
the inspections set forth in the specification where such
inspections are deemed necessary to assure supplies and services
conform to prescribed requirements. Unless otherwise specified
herein or in the contract, the provisions of MIL-A-48078 shall
apply and are hereby made a part of this detail specification.
4.1.1 Responsibility for compliance. All items must meet all
requirements of sections 3 and 5. The inspection set forth in
this specification shall become a part of the contractor's overall
inspection system or quality program. The absence of any
inspection requirements in the specification shall not relieve the
contractor of the responsibility of assuring that all products or
supplies submitted to the Government for acceptance comply with
all requirement of the contract. Sampling in quality conformance
does not authorize submission of known defective material, either
indicated or actual, nor does it commit the Government to
acceptance of defective material.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business