MIL-D-48350 (PA)
3.7 Firing, Mines-Singles. - The control panel shall
fire in all combination modes as indicated by Tables A, B and D
of dwg. 9288645 in accordance with the output requirements
described by Curve B.
3.8 Firing, Markers - Pairs. - The control panel shall
fire in all combination modes as indicated by Tables A, B and D
of dwg. 9288645 in accordance with the output requirements des-
cribed by Curve C.
3.9 Firing, Markers-Singles. - The control panel shall
fire in all combination modes as indicated by Tables A, B and D
of dwg. 9288645 in accordance with the output requirements des-
cribed by Curve D.
3.10 Workmanship. - All parts and assemblies shall be fab-
ricated and finished in a thorough, workmanlike manner. They
shall be free of burrs, chips, sharp edges, cracks, unblended
radii, surface defects, dirt, grease, rust, corrosion products,
and other foreign matter. The cleaning method used shall not be
injurious to any parts, nor shall the parts be contaminated by
the cleaning agents. All electrical assemblies shall be free
of harmful cleaning and soldering agents that may be Injurious
to the electrical assembly. All marking shall be neat and
sharply defined.
3.11 Submission of results of contractor-conducted exami-
nations and tests. - The contractor shall forward copies of the
results of any of his examinations or tests to the designated
address as specified in 6.4.
3.12 First article inspection. - This specification makes
provisions for first article inspection. Requirements for the
submission of first article samples by the contractor shall be
as specified in the contract.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for Inspection.-Unless otherwise
specified in the contract or purchase order, the supplier is
responsible for the performance of all inspection requirements
as specified herein. Except as otherwise specified In the
contract or order, the supplier may use his own or any other
facilities suitable for the performance of the inspection re-
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business