XM58.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

MIL-D-48350 (PA)

4.3.3 TESTING

4.3.3.1 Rear Panel connector ground continuity (see 3.5).-

Major Defect - Code No. 07001. This test shall be performed

100 percent in accordance with 4.4.2. Any control panel failing

to comply with all of the specified requirements shall be classed

defective and removed from the lot. (Non-destructive test)

4.3.3.2 Jettison Power (see dwg. 9287814). - Major Defect -

Code No. 07001. - This test shall be performed 100 percent in

accordance with 4.4.3. Any control panel failing to comply

with all of the specified requirements shall be classed de-

fective and removed from the lot. (Non-destructive test).

4.3.3.3 Control Panel Assembly Light Dimming. - (see dwg.

9287814) - Major defect - Code No. 07003. This test shall be

performed 100 percent in accordance with 4.4.4. Any panel fail-

ing to comply with all Of the requirements shall be classed

defective and removed from the lot. (Non-destructive test).

4.3.3.4 Press-to-test switch lighting. - (see dwg. 9287814)

Major Defect - Code No. 07004. This test shall be performed 100

percent in accordance with 4.4.5. any control panel classed

-----

defective shall be classed defective and removed from the lot.

(non-destructive test).

4.3.3.5 Firing, Mines-Pairs (see 3.6). - Major Defect -

Code No. 07005. Each control panel assembly, after having

successfully passed the test requirements of 4.4.3.1, shall

be tested in accordance with 4.4.6. Any control panel assembly

failing to comply with all of the specified requirements shall

be classed defective and removed from the lot. (Non-destructive

test).

4.3.3.6 Firing, Mines-Singles (see 3.7) - Major Defect -

Code No. 07006. Each control panel assembly, after having suc-

cessfully passed the firing, mines - pairs test requirements

of 4.3.3.6, shall be tested in accordance with 4.4.7. Any con-

trol panel assembly failing to comply with all of the specified

requirements shall be classed defective and removed from the

lot . (Non-destructive test).

4.3.3.7 Firing, Markers-pairs (see 3.8). - Major Defect -

Code No. 07007. Each control panel assembly, after having

successfully passed the mines-singles firing test requirements