MI L-C-48887 (PA)
3.5 Workmanship. - All parts shall be fabricated and
finished or a ricated and loaded) in a thorough, workman-
like manner, and all manufacturing, processing and assembly
operations shall be correctly performed. The parts shall be
clean and free of burrs, sharp edges, unblended radii, surface
defects, chips, dirt, grease and oil (except where specifica-
lly required), corrosion products and other foreign matter.
The cleaning methods used shall not be injurious to any part,
nor shall the parts be contaminated by the cleaning agent.
Exterior surface coatings shall be continuous except for a few
light scratches not exposing base material. All required mark-
ings shall be neat and sharply defined.
3.6 First Article Inspection. - This specification contains
technical provisions for first article inspection. Requirements
for the submission of first article samples by the contractor
shall be as specified in the contract.
4.
QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for Inspection and Standard Quality
Assurance Provisions. - Unless otherwise specified herein or
in the contract, the provisions of MIL-A-48078 shall apply
and are hereby made a part of this detail specification.
4.2 Classification of Inspections. - The following types
of inspections shall be conducted on this item:
a.
First Article Inspection
b.
Quality Conformance Inspection
4.3 First Article Inspection
4.3.1 Submission. - The contractor shall submit a first
article sample [see 6.1b) as designated by the Contracting
Officer. The first article sample shall consist of 50 complete
repelling charge assemblies. The first article sample shall
be evaluated in accordance with the provisions of 4.3.2 and 4.5.3.
4.3.2 Inspections to be Performed. - See MIL-A-48078 and
paragraphs 4,4.2.1 and 4 .5.4 specified herein.
4.3.3 Rejection. - See MIL-A-48078.
4.4 Quality Conformance Inspection
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business