MIL-R-63319A(AR)
4.4 Quality conformance inspection.
4.4.1
Inspection lot formation. Inspection lots shall comply
with the lot formation provisions of MIL-R-83401.
4.4.2 Examination.
Inspection of product for delivery shall
consist of groups A and B. (See 4.4.2.1 through 4.4.2.6).
4.4.2.1 Group A inspection. Group A inspection shall consist
of the examinations and tests specified in 4.4.2.4, and shall be
made on the same set of sample units, in the order shown.
a. Sampling plan. Resistor networks that are out of
resistance tolerance or which experience a change in resistance
greater than that permitted for the tests of subgroup 1 shall be
removed from the lot. Lots having more than 10 percent total
rejects, due to exceeding the specified resistance change limit,
shall not be furnished on the contract. Sampling and inspection for
subgroups 1 and 2 shall be in accordance with MIL-STD-105 for general
inspection level II.
4.4.2.2 Group B inspection. Group B inspection shall consist
of the tests specified in 4.4.2.5, in the order shown. They shall
be performed on sample units that have been subjected to and have
passed the Group A inspection.
a. Sampling plan. Sampling and inspection shall be in
accordance with MIL-STD-105 for inspection level S-4. Samples units
which have passed all the Group B inspections may be delivered on
the contract provided they are within resistance tolerance and meet
requirements for visual and mechanical inspect ion.
4.4.2.3 Group C inspection. Group C inspection shall consist
of the tests specified in 4.4 .2.6, in the order shown. They shall
be performed periodically, as specified in 4.4.2.6, on sample units
selected from lots that have passed groups A and B inspection.
a. Sampling plan. The sample size for each subgroup in
4.4.2.6 shall be 10 units. Sample units which have been subjected
to group C inspection shall not be delivered on the contract. If
rejects exceeds those allowed in 4.4.2.6, supplier shall perform
failure analysis and furnish copy to technical agency listed in 6.4.
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business