MIL-P-63316(AR)
3.6 First article inspection. This specification contains technical
provisions for first article inspection. Requirements for the submission
of first article samples by the contractor shall be as specified in the
contract.
3.7 Workmanship. All parts and assemblies shall be fabricated and
loaded in a thorough, workmanlike manner. They shall be clean and free of
burrs, chips, sharp edges, cracks, surface defects, dirt, grease, oil,
rust, corrosion products, and other foreign matter. The cleaning method
used shall not be injurious to any part nor shall the parts be
contaminated by the cleaning agent. All required markings shall be neat
and sharply defined.
QUALITY ASSURANCE PROVISIONS
4.
4.1 Responsibilities for inspection and standard quality assurance
provisions. Unless otherwise specified herein or in the contract, the
provisions of MIL-A-48078 shall apply and are hereby made a part of this
detail specification.
4.2 Classification of inspections. The following types of
inspection shall be conducted on this item.
First Article Inspection
a.
b.
Quality Conformance Inspection
4.3 First article inspection
4.3.1 Submission. The contractor shall submit a first article
sample as designated by the Contracting Officer for evaluation in
accordance with provisions of 4.3.2. The first article sample shall
consist of the following items in sample quantities as indicated.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business