MIL-M-46985D(MU)
STANDARDS
MILITARY
MIL-STD-105
- Sampling Procedures and Tables for Inspection by
Attributes.
MIL-STD-129
- Marking for Shipment and Storage.
DRAWINGS
US ARMY MUNITIONS COMMAND
EDGEWOOD ARSENAL
- Mine, Chemical Agent, VX, M23, Inert Components.
DL37-1-58
( C o p i e s of specifications, standards, drawings and publications required
by suppliers in connection with specific procurement functions should be
obtained from the procuring activity or as directed by the contracting
officer.)
REQUIREMENTS
3.
3.1 Materials and components.
3 . 1 . 1 Materials. All materials cited on Drawing DL37-1-58 or on the
subsidiary drawings shall conform to the specifications thereon, or to
the specific characteristics set forth on the drawings.
3.1.2 Components. All components of the mine shall conform to the
specifications and drawings listed on Drawing DL37-1-58 and the subsidiary
drawings.
3 . 2 Shutter. The shutter shall be in a position to fire the fuze when
the arrow on the arming plug indicates "ARMED"; and shall prevent the fuze
from firing when the arrow indicated "SAFE". The shutter guide pin and
shutter bearing pin subassemblies shall be riveted to withstand a load
of at least 175 pounds when tested in accordance with 4.2.4.1.
3.3 Arming of the arming plug. The arming plug assembly (Dwg C37-1-27)
shall arm when a torque of 5 ± 3 inch-pounds is applied to the setting
knob when tested in accordance with 4.2.4.2, Breakaway torque of 20 inch-
pounds maximum is permitted.
3.4 Mine handle assembly. The mine handle assembly (Dwg D37-1-34) shall
suffer no permanent distortion nor show evidence of separating from the
cover when a force of 75± 5 pounds is applied in accordance with 4.2.4.3.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business