INCH-POUND
MIL-DTL-45417D
31 January 2014
SUPERSEDING
MIL-B-45417C
1 JUNE 1973
DETAIL SPECIFICATION
BANDOLEER, APERS, MINE, M7, ASSEMBLY
Inactive for new design after 16 July 1996
This specification is approved for use by all Departments and Agencies at the Department of
Defense.
1. SCOPE
1.1. Scope. This specification describes the requirements and verification methods for
the Bandoleer, APERS, Mine, M7, Assembly.
2. APPLICABLE DOCUMENTS
2.1. General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
requirements documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to:
Commander, U.S. Army ARDEC, ATTN: RDAR-QES-E, Picatinny Arsenal, New Jersey
07806-5000 or e-mailed to usarmy.picatinny.ardec.list.ardec-stdzn-branch@mail.mil
. Since contact information can change, you may want to verify the currency of this
information using ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 1345
DISTRIBUTION STATEMENT A. Approved for public release; distribution unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business